Site Glossary
Special | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | ALL
4 |
---|
45 degrees45 degrees is an angle created when 90 degrees is divided in half | |
5 |
---|
5 in 1 toolA 5 in 1 is amultifunction hand tool often used for scraping | |
9 |
---|
90 degrees90 degrees is an angle created when two lines are square or perpendicular to each other | |
A |
---|
AbrasiveAbrasive is different grades of rough grit applied to a paper backing to remove material when sanding. Abrasives range from coarse to fine
and have numbers to indicate their roughness with lower numbers meaning coarser
grits and higher numbers meaning finer | |
ABSABS is black plastic pipe used in plumbing for drain, waste, and vent pipes. | |
Actuator | |
AdhesionAdhesion is the ability for a material to stick to a surface | |
Adjustable wrenchAn adjustable wrench is a tool for tightening hex nuts and bolts of various sizes | |
AFCI | |
Air dryTo air dry is the hardening process of a material that depends on the air or solvent in the mix to evaporate completely | |